Media available for large format printingMedia available for large-format latex printing >>
Media available for large format solvent printing
>>
Media available for UV curable printing (rigid materials) and cropping >>
| Media available for large-format latex printing. | 140g Paper
Rigid and relatively thick paper of the highest quality. Designed for interior graphics.
Print width: 1300
| 200g Paper
Rigid and relatively thick paper of the highest quality. Designed for interior graphics.
| Gloss/Matt Monomeric Film
2-year self-adhesive rolled film for general purposes applicable on flat surfaces.
Intended use: light boxes, stickers with white underprint, window pane stickers applied from the inside.
1-year guarantee.
Print width: 1500
| Transparent Monomeric Film
3-year self-adhesive rolled film for general purposes applicable on flat surfaces. As this film does not provide full coverage, it can be applied only on white backgrounds. It can be used also for advertising lightboxes, however even better results can be achieved with films specially designed for this kind of advertising: self-adhesive Backprint or Backlit. Film applied on glass gives an effect of a stained-glass window.
1-year guarantee.
Print width: 1500
| OneWayVision Film
Perforated, self-adhesive film for vehicle or shop window panes. Suitable for view and glare protection (around 50% reduction) so people can see through it from the inside, but not from the outside.
1-year guarantee.
Print width: 1300
| Cast Film for Irregular Surfaces
5-year self-adhesive cast film designed for corrugations, curved and other irregular surfaces e.g. car bodies. Its application requires a lot of experience and using e.g. reheater. To protect prints from mechanical damage it is recommended to laminate them with proper cast film.
2-years guarantee.
Print width: 1300
| Backlit Self-adhesive Film for Lighted Advertisements
White 5-year self-adhesive translucent polymer film intended for flat and slightly curved surfaces. Transmits and disperses around 40% of light. In the printing process, a double layer of ink is applied, making the printed piece slightly darker during the day, but showing intense, rich, eye-catching colours, when backlit. For large light boxes, as compared to printing done directly on plexiglass, it facilitates shipment (transported rolled up) and reduces costs.
Application: Light boxes.1-year guarantee.
Print width: 1500
| Glueless backlit film for light boxes
200 micrometer polyester film coated with light-dispersing white layer. In the printing process, a double layer of ink is applied, making the printed piece slightly darker during the day, but showing intense, rich, eye-catching colours, when backlit. It is recommended for outdoor light boxes in shops and pubs or for frequently changed graphics in order to reduce costs. For large light boxes, as compared to printing done directly on plexiglass, it facilitates shipment (transported rolled up) and reduces costs.
Application: Light boxes.1-year guarantee.
Print width: 1500
| Canvas
360 g cotton fabric coated with several priming layers that enhance the adhesiveness and colour properties of the printed material. It can be put on frames. The ink layer does not break or chip off even when stretched or folded over sharp edges.
| Block Out Poster/Rollup
210 µm white matte polypropylene film. With good resistance to scratching and water ingress, after the overprint has dried completely. Intended for roll-up systems, but can also be used as a perfect alternative for paper for outdoor advertising and places with high humidity. It has a very smooth surface and non-transparent silver back. Thanks to its PVC-free composition, it is also environmentally-friendly.
| WallArt self-adhesive film (wallpaper)
White matt self-adhesive film that is 80 micrometers thick. It is intended for indoor applications. It is used mainly for photo wallpapers, decorations or wall inscriptions. Reduced adhesion allows for easy application, repositioning and removal. It is perfect for acrylic coatings, but it should not be used on latex paints. As modern paints containing diverse components that reduce dirt and facilitate cleaning are used more and more frequently, it is always recommended that film adhesiveness is checked. The surface for application must be completely dry (3–4 weeks after painting).
| EASY DOT
100-micrometre PVC monomeric white film (matt or glossy) intended for indoor applications. It can be easily applied to level or slightly curved surfaces. The strong film glue does not react chemically with ink.
It is coated with a special DOT glue that facilitates application without air bubbles (easy and quick application without the need to employ a team of professionals even for large surfaces) and allows the advert to be moved without losing its adhesive properties.
If multiple use is envisaged, keeping the protective base is recommended. The film is certified B1 and M1 fire-retardant.
Application: This material is perfect for: POS, shop windows, interior and furniture decorations, fairs and presentations
| SOLVOPRINT Wallpaper
350 gsm (appr. 470-micrometre) PVC non-woven wallpaper, matte, intended for wall applications using standard wallpaper tools. Latex print ensures photo-realistic print quality. This quick-drying and scratch-resistant material is certified B1 fire-retardant under DIN 4102, it has been approved by the Polish National Institute of Hygiene and is furnished with Bio-Pruf antimicrobial protection (reduces unpleasant odour, mould and aesthetic issues on surfaces).
Application: wall graphics (including schools, hospitals, restaurants, homes, etc. thanks to the environmentally-friendly properties of latex print), customised interior design
The wallpaper is available in two finishing variants:
smooth (delicate, almost invisible texture)
sand (fine sand grain texture)
See application guide: Pradnik aplikacji fototapety.pdf
| Neshen ERFURT Wallpaper
220 gsm non-woven wallpaper manufactured from cellulose and textile fibres combined with polymer binding agents. It does not contain PVC, heavy metals, formaldehyde, plasticisers, solvents or fibreglass. It is intended for wall applications using standard wallpaper tools. It can be easily removed without any traces when no longer desired. Photo-realistic quality of print. Quick-drying, scratch-resistant. It has the approval of the Polish National Institute of Hygiene, the Oeko-Tex 100 certificate and DIN EN 13501-1 fire protection classification.
Available in smooth finish.
Application: wall graphics (including schools, hospitals, restaurants, homes, etc. thanks to the environmentally-friendly properties of latex print), customised interior design.
See application guide: Poradnik aplikacji fototapety.pdf
|
Media available for large format solvent printing
. | 140g Paper
Rigid and relatively thick paper of the highest quality. Designed for interior graphics.
Print width: 1300
| 200g Paper
Rigid and relatively thick paper of the highest quality. Designed for interior graphics.
| Gloss/Matt Monomeric Film
2-year self-adhesive rolled film for general purposes applicable on flat surfaces.
Intended use: light boxes, stickers with white underprint, window pane stickers applied from the inside.
1-year guarantee.
Print width: 1500
| OneWayVision Film
Perforated, self-adhesive film for vehicle or shop window panes. Suitable for view and glare protection (around 50% reduction) so people can see through it from the inside, but not from the outside.
1-year guarantee.
Print width: 1300
| 450g HQ Frontlit Banner
Vinyl fabric with smooth print surface for single side printing. Main usage in outdoor advertising as banners, on building walls and points of sale. Easiness in transport and great tear strength make it ideal for printing graphics often carried and exposed e.g. points of sale or roll up banners.
1-year guarantee.
Print width: 1500
|
According to producers inks have 3-year UV resistance when exposed outdoor. Guarantee times listed in specifications refer to outdoor presentation. For inner usage ink UV resistance should last 2-3 years longer.
| Media available for UV curable printing (rigid materials) and cropping. | Five-ply corrugated single side whitened board.
Designed for stand ups, advertising stands, boxes etc. Whitened surface has in fact light grey colour, backside is brown. On the front (whitened) side slight lines are visible in places where cover touches inner wave of the board. Ideal for plotter cutting and scoring – can be cut to almost any shape and formed into complex three-dimensional bodies.
For indoor usage.
Maximum Print Format: 1200 x 1800 mm.
| White and Colour Light Foamed PVC
Anwipor Light boards made from foamed PVC are characterized by regular inner structure with closed cells and smooth, hard surface with no pores.
Advantages:
• Low price
• Low density
• Very low water absorption
• Corrosion- and chemical-proof
• Fire resistant
• Easy mechanical and thermal processing
• Option of double side printing
Disadvantages:
• Soft surface
• As only one side is foil protected, slight dents and scratches may appear (smaller on foil protected, larger on the non-protected side) during transport or storage. After printing those defects become invisible from the distance of few meters.
For indoor & outdoor usage.
Maximum Print Format: 1220 x 2500 mm.
| Kapa Foam Boards.
Light Kapa foam board consists of a polyurethane core in the network honeycomb structure and is covered on both sides with bonded sheet layer.
• Useable on both sides
• Easy processing
• High levels of stiffness
• Good dimensional stability
• Excellent flatness
For indoor usage.
Maximum Print Format: board 3mm, 5mm: 1000 x 1400mm , board 10mm: 1000 x 1400mm
| White, Colour & Transparent Plexiglass
PMMA (polymethylmethacrylate) boards belong to the hardest thermoplastic materials and are UV and weather resistant. Transparent PMMA is characterised by perfect transmittance of light at around 92%, while white PMMA has very good properties for the dispersion of light. Main applications: light boxes, advertising banners, lighting fixtures, decorations, doors, glass elements etc.
Graphics can be printed in the following manner:
• Transparent - 1x CMYK - Stained-glass-like effect.
• Transparent - 1x CMYK + WHITE - Standard print on white background in places with declared white colour, while the remaining elements remain transparent.
• Transparent for light boxes - CMYK + WHITE + CMYK - A WHITE layer is placed between two CMYK layers to disperse light. In this way the printed material looks like a standard sign during the day, but when backlit, it shows intensive, rich, eye-catching colours.
• White - 1x CMYK - Standard print-like effect on white background.
• White for light boxes - 2x CMYK - The printed material is darker without light, but when backlit, it shows intensive, rich, eye-catching colours. Intended for use in light boxes e.g. in shops and pubs.
For indoor & outdoor usage.
Maximum Print Format: 1220 x 2500 mm.
Please note! Attention! As plexi boards are mechanically cut to size with saw blades with a large number of teeth, their edges are not perfectly smooth and need further finishing or framing (up to Customer's decision).
You can order laser cut smaller boards of 436 mm x 586 mm maximum (including white colour applications) or boards produced on colour PMMA and other materials under the Colour Boards Price Quote tab.
Go to Price Quote.
| PENTAPRINT - white matt PVC foil - 0,5mm
Created in the process of extrusion foils made from hard PVC characterize with high chemical and UV resistance, optimal flatness, easy thermal forming and mechanical processing. Usage: labels,stickers, displays, adv signboards, calendars, price-tags, hanging boards etc.
For indoor & outdoor usage.
Maximum Print Format: 1000 x 1400mm.
| TUBOND 3 mm - (aluminium - polyethylene - aluminium layered board) white or colour
Light, stiff and durable composite boards for versatile applications. They consist of varnished 0.2 mm thick aluminium layers joined together by a low-density polyethylene core (LD-PE). The material is perfect for all kinds of advertising structures that need to be light, flat and stiff. With its weight of 3.5 kg/m2, it is nearly twice as light as 10 mm foamed PVC.
Maximum Print Format: 1250 x 2500
| Tusand 10mm - (PCV-XPS-PCV)
Light, stiff layered boards consisting of two film-protected 1 mm PVC covers that are joined together by an extruded polystyrene (XPS) core. Thanks to its weight (only 2.4 kg/m2) and stiffness, it is used for installations of extremely large elements. It can be cut with a knife or milled. It was first used on a large scale in August 2012 as part of a retailer advertising campaign featuring two cooks. The material is perfect for stands, signs and hanging advertisements in places, where low weight matters.
Maximum Print Format: 1250 x 2500
| Transparent PET film 0.8 mm - (polyethylene terephthalate)
Thermoplastic polyester available in the form of transparent boards. It is very durable, hard, resilient, heat and chemicals resistant. It is used for the production of labels, stands, light boxes, poster protection elements and various advertising accessories.
Maximum Print Format: 1250 x 2500
| Backlit Self-adhesive Film for Lighted Advertisements
70 micrometer, 5-year self-adhesive translucent polymer film. Intended for transparent surfaces. The medium is covered with 2 CMYK layers, which make the printed material darker without light, but when backlit, it shows intensive, rich, eye-catching colours. After UV printing, the film becomes stiffer, which facilitates application, and more resistant to scratches than solvent prints. It is also recommended for light boxes. For large light boxes, as compared to printing done directly on plexiglass, it facilitates shipment (transported rolled up) and reduces costs.
Maximum Print Format: 1250 x 2500
| Backlit film for light boxes without glue
200 micrometer polyester film coated with light-dispersing white layer. In the printing process, a double layer of ink is applied, making the printed piece slightly darker during the day, but showing intense, rich, eye-catching colours, when backlit. It is recommended for outdoor light boxes in shops and pubs or for frequently changed graphics in order to reduce costs. For large light boxes, as compared to printing done directly on plexiglass, it facilitates shipment (transported rolled up) and reduces costs.
Application: Light boxes.
Maximum Print Format: 1250 x 2500
|
|
|
|
|
