| Product Information | | Opis produktu: |
Single-sided DiBond light boxes with milled graphics:
- Smart, sophisticated casing made of 3 mm Dibond plate, UV and corrosion resistant.
- Compact structure – the light box consists of a stable, integral case that is ready to be installed on the wall. Light boxes mounted on the wall using screws installed under magnetic plugs can be integrated into longer structures consisting of several units.
- Weather-proof (fit for indoor as well as outdoor applications).
- Light boxes can be ordered in two variants:
- Variant 1 – mounted on the wall using screws. Very quick and simple installation on the wall through 4 holes that are hidden under 4 magnetic plugs located on the front panel of the light box (a sucker to remove the plugs is included in the kit). Plugs match the front panel of the light box in colour and shape, which makes them invisible from a few metres away. For a close-up view, please see the image below.
- Variant 2 – mounted on hooks, it requires a precise positioning of holes for the hooks on the wall and needs additional security features to prevent unauthorised manipulation and to protect it from strong winds (for placement of locking pins see the Mounting Instructions link). Each light box is supplied with templates facilitating hole marking.
- Pros and cons of both variants are listed in the following table:
 In translation: `Array`
| Variant 1
– mounted on the wall using screws | Variant 2
– mounted on hooks | P
R
O
S | Very quick and simple installation (after removing 4 small plugs, the light box itself can serve as a template for the positioning of holes for mounting elements, without the need for disassembly) | No visible fixing elements or plugs on the front and side panels | | Possibility of building longer structures consisting of several light boxes (light boxes can be fitted side by side easily and smoothly, with connection borders hardly visible) | | | Can be mounted directly below eaves or cornices | | C
O
N
S | Slightly noticeable plugs in close-up view (plugs are not visible from a few metres away, see images below) | Cannot be mounted directly below eaves or cornices (the distance from an eave or a cornice must be at least 30 mm) | | Additional security features needed to prevent unauthorised manipulation and protect from strong winds | | Cannot be integrated into longer structures consisting of several light boxes |
 Double-sided light boxes.
Light boxes can be ordered in three variants, depending on how they are mounted:
- Light boxes fitted at the side edge
- Light boxes fitted at the lower edge (pylon)
- Light boxes fitted at the upper edge (hanging)
Double-sided light boxes are designed to provide durability and resilience to wind load in accordance with standard PN-EN 1991-1-4 for the 1st category of wind load in accordance with standard PN-EN 1993-1-4.
Double-sided light boxes are supplied with two brackets for mounting.
Please note
If graphics on the opposite sides of a light box fitted at the side edge are different, please write a note in the order comments to explain how to place graphics on the different sides of the light box (for description see 'How to prepare').
- Mounting elements – Light boxes are not supplied with mounting elements (studs, hooks) because wall material and structure may vary. Light boxes can only be installed by qualified staff who can select appropriate elements suited for the wall intended for light box mounting. For the hook-mounted variant, select hook sizes listed in the Mounting Instructions of a length appropriate for the intended wall structure.
- Milled graphics lined with 2 mm opaline Plexiglass board. The following graphics options are available:
- White (opaline Plexiglass)
- Colour (opaline Plexiglass lined with translucent film). We use 4500 TF series Avery film for backlit signage
- Colour (opaline Plexiglass lined with translucent film and CMYK print or CMYK print only)
In translation: `Array`   
 In translation: `Array`
- Size range:
- Smaller light box size: 400 – 1,050 mm (if plug variant is selected, you can build long structures n x 2.4 m wide)
- Larger light box size: 500 – 2,400 mm
- Thickness: 83 mm
- Very bright light, comparable with the competition's „Twice as many LEDs” option (LED strips with 9.6 W/m power, number of strips depends on the box size). 12V DC power supply – each light box is provided with an external power supply with power suited to the number of LEDs fitted in the box (the power supply is not waterproof; light boxes intended for outdoor use must have the power supply fitted inside the building).
- Waterproof light boxes suitable for interior and exterior signage.
- Frame colour – 6 colours to choose from: white, silver, black, red, green, yellow, blue with a matt finish
- Mounting Instructions included
- Optional (additional fee charged): hole marking template for hooks and screws (for light boxes mounted on hooks only, to facilitate and speed up the mounting procedure)
In translation: `Array`
| | Additional options |
- Programmable timer switch
- A power cord of any length up to 5 m can be provided (normally, every light box is supplied with a 1.5 m power cord)
| | Photos | 
 
  |
|
|
|
|
