Sizes | Working Area |
Grawerowanie CO2 : 605 x 452 mm
Grawerowanie YAG : koło o śrenicy 30cm
| Full Bleed Size | The size of your artwork cannot exceed plotter working area. |
|
Graphics | Colour Model |
- Objects for engraving should be designed in black (100% K).
- Trim lines should be designed using a hairline in red (100% M, Y).
- For CorelDraw, please disable the Colour Management option in the Tools menu, if available.
| Text | All text elements must be outlined. Text quality is perfect for chars not smaller than 4 point. | Bitmap graphics | Objects for engraving can be designed both in vector (with fill) and black and white bitmap format. The recommended resolution for bitmaps is 300 dpi.
Greyscale cannot be used. Therefore, to achieve the semblance of grey tones, the extent of black fill must be modified.
The minimum thickness of engraved lines is 0.2 mm.
PLEASE NOTE! Engraving of large solid areas is not recommended, as bands of different shade may appear. Your artwork must contain:
– plate contour – a rectangle outlined by red hairline 100%M, 100%Y;
– holes to be cut out (if needed) – circles with the required diameter outlined by red hairline 100%M, 100%Y;
– optional placement of holes to be drilled (for the following materials: anodized aluminium, blackened aluminium and 'Graval' anodized aluminium) – a 2mm circle outlined by red hairline 100%M, 100%Y. |
|
Saving to File | File Formats | Preferred: PDF
Accepted: CDR, TIFF, JPG (not recommended).
Please note: In case of INDESIGN software, we accept only PostScript files. Otherwise, please use the Comment section to inform us: "Attention: InDesign file. Convert to PS, please". CDR
Accepted: PDF, AI
Please avoid multi-page files. Put plates of the same size and material but with different content on one page.
|
|
|
|
|
|